The stainless steel detector provides protection and resistance to corrosive agents. Classified IP 66, they are resistant to dust and water ingress. The precalibrated sensors of the OLCT 20 can be disconnected by turning the head of the unit. These “smart” sensors can be calibrated on a work bench, outside hazardous areas.
OLC 20 Detector with a Wheatstone bridge output:
The generation of OLC 20 combustible sensors are unaffected by poisons. The units provide extremely quick response times and complete reliability.
OLCT 20 Transmitter with 4-20mA output:
The OLCT 20 sensor units, which are equipped with pre-calibrated sensors (flammable, toxic or oxygen), are classified as flameproof or intrinsically safety according to your needs or the gases detected. As in the case of the OLC 20, they are fitted on the housing by a M25 or 3/4″ NPT thread.
| ATEX | A product regulation which ensures the safety of equipment intended for use in potentially explosive atmospheres in the European Union. |
| CE | indicates that a product has been assessed by the manufacturer and deemed to meet EU safety, health and environmental protection requirements. |
| China Ex | Testing and certifications providers in China |
| EAC | Gost R and EAC certifications are mandatory in order to have access at all to the Russian market and the markets of the five EAC members |
| C₂H₂ | Acetylene |
| C₂H₄ | Ethylene |
| C₂H₄O | Ethylene Oxide |
| C₂H₆ | Ethane |
| C₂H₆O | Ethanol |
| C₃H₆ | Propylene |
| C₃H₆O | Acetone |
| C₃H₈O | Isopropyl Alcohol |
| C₄H₁₀O | Isobutanol |
| C₄H₆ | Butadiene |
| C₄H₈O | Methyl Ethyl Ketone (MEK) |
| C₅H₁₂ | Pentane |
| C₆H₁₄ | Hexane |
| C₆H₆ | Benzene |
| C₇H₈ | Toluene |
| C₈H₁₀ | Xylene |
| CH₂₀ | Formaldehyde |
| CH₃I | Methyl Iodide |
| CH₃OH | Methanol |
| COCl₂ | Phosgene |
| Combustible % LEL | Combustible Percent Lower Explosive Limit (LEL) |
| Combustible % Vol |
| F₂ | Fluorine |
| HF | Hydrogen Fluoride |
| N₂H₄ | Hydrazine |
| VOC | Volatile Organic Compound |
Copyright © 2019 Noetec S.R.L.
